Steel Fiber Reinforced Refractory Castable For Sale

Steel Fiber Reinforced Refractory Castable For Sale is refractory material that is made of refractory aggregate, powder, binder and additive and steel fiber. In other word, it is produced by adding refractory steel fiber into the raw material to improve its strength and thermal shock resistance. Because of its high strength, wear resistance, and good thermal shock resistance, it has been widely used in the high-temperature wearable parts of the kiln, furnaces, and boilers and so on.

steel fiber refractory castable

Get Quotation

    Specification Of Steel Fiber Reinforced Refractory Castable

                   Brands

    Items

    YH-F16 YH-F16K YH-F17
    Al2O3+SiO (%)≥ 70 75 80
    Bulk density g/cm3≥ 110℃×24h 2.6 2.7 2.8
    Modules of rupture Mpa≥ 1110℃×3h 11 12 13
    110℃×24h 11 12 13
    Cold crushing strength Mpa≥ 1110℃×3h 90 100 110
    1110℃×3h 90 100 110
    Linear dimensional change % 110℃×24h ±0.1 ±0.1 ±0.1
    1110℃×3h ±0.3 ±0.3 ±0.3

    Buy Steel Fiber Reinforced Refractory Castable

    Steel fiber reinforced castable is also called high strength refractory castable, or steel fiber refractory castable. It is made of special bauxite clinker as aggregate, high quality bauxite clinker and corundum powder as matrix, composite materials such as the superfine powder as binder and additives, and heat-resistant stainless steel fiber. It belongs to hydraulic refractory castable.

    RS Group steel fiber reinforced refractory castable for sale, about 0.6%-2.5%, that added to the castable can improve its strength, toughness, spalling resistance and thermal shock resistance. Because of such properties, it is excellent in high temperature fluctuations, and thus improve its service life. In addition, the steel fiber that is added to the castable restrains the shrink in the process of maintenance, baking and using. It also improves the mechanical shock resistance and wear resistance, thus avoids the rupture and spalling because of the cracks produced from the thermal stress and mechanical stress.

    steel fiber castable

    Components:

    Aggregate:     special bauxite clinker

    Matrix:     high quality bauxite clinker, corundum powder

    Binder and Additives:     superfine powder

    Specialty:   heat-resistant stainless steel fiber(about 0.6%-2.5%)

    Get Quotation

      Cheap Steel Fiber Reinforced Refractory Castable

      Compared with the ordinary refractory castable, steel fiber reinforced refractory has the advantages as follows:

      buy steel strength castable

      Properties

      • High strength under high temperature, high wear resistance capacity, high refractoriness, and high refractoriness under load;
      • High density, low porosity, high toughness, anti-burst, and good thermal shock resistance;
      • Spalling and wear resistance, high temperature resistance, and easy construction;
      • Good liquidity, convenient maintenance, and strong corrosion and slag resistance, etc.

      Get Quotation

        Its using method is the same as that of the concrete. After being selected formula, stirred the raw material, rammed, maintained and heat treated, it is used in different parts, according to the engineering condition.

        Steel Fiber Reinforced Refractory Castable Applications

        Because of its good properties, high strength refractory castable has a wide range of application in the steel, metallurgy, chemical, and construction industry. In most cases it is mainly used in the wearable parts because of the temperature change, such as the following parts:

        Steel fiber reinforced refractories manufacturers

        Uses

        • Feed opening, lining of boiler used in the power plant, and cyclone separator;
        • Circulating fluid bed boiler, rotary kiln, kiln mouth, kiln head cover, and back-feeder;
        • Furnace exit, roof and walls
        • Boiler, heat treatment furnace, and garbage incinerator, etc.

        Get Quotation

          Steel Fiber Reinforced Refractory Castable Manufacturer

          Rongsheng Refractory Company as a professional steel fiber reinforced refractory castable manufacturer in China is established in the early 90s of twenty century and have 160 staffs, including 12 professional technicians. With an annual productivity of 60 thousand ton, it has production lines for the lightweight and heavyweight materials, perfect production examination and testing equipment, including 10 forming presses of 400 to 1000 ton as well as 2 high-temperature tunnel kilns, one is 148 meters long, the other is that of 118.

          After 20 years of hardworking and development, it has become a comprehensive enterprise producing refractory materials in metallurgy, building materials, electric power and chemical industry, etc. Rongsheng has established cooperative relations with multiple scientific research institutes, and its products has exported to Japan, Indonesia, Iran, Kazakhstan, Vietnam, etc. Rongsheng provides professional products and service for our customers. If you have any requirements for steel fiber reinforced refractory castable for sale cheap, just send us Email for detailed information now!

            Leave your requirements about the refractories you need. We will reply you within 24 hours.